View HLMP-EJ26-PS000_3832024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

t-1 3 / 4 (5 mm) precision optical performance alingap led lamps technical data features ? well defined spatial radiation patterns ? viewing angles: 6 , 15 , 23 , 30 ? high luminous output ? colors: 590 nm amber 605 nm orange 615 nm reddish-orange 626 nm red ? high operating temperature: t j led = +130 c ? superior resistance to moisture ? package options: with or without lead stand- offs benefits ? viewing angles match traffic management sign requirements ? colors meet automotive and pedestrian signal specifications ? superior performance in outdoor environments ? suitable for autoinsertion onto pc boards applications ? traffic management: traffic signals pedestrian signals work zone warning lights variable message signs ? commercial outdoor advertising: signs marquees ? automotive: exterior and interior lights description these precision optical perform- ance alingap leds provide superior light output for excellent readability in sunlight and are extremely reliable. alingap led technology provides extremely stable light output over long periods of time. precision optical performance lamps utilize the aluminum indium gallium phos- phide (alingap) technology. these led lamps are untinted, nondiffused, t-1 3 / 4 packages incorporating second generation optics producing well defined spatial radiation patterns at specific viewing cone angles. these lamps are made with an advanced optical grade epoxy, offering superior high tempera- ture and high moisture resistance hp sunpower series hlmp-elxx hlmp-ejxx hlmp-ehxx hlmp-egxx performance in outdoor signal and sign applications. the high maximum led junction tempera- ture limit of +130 c enables high temperature operation in bright sunlight conditions. the package epoxy contains both uv-a and uv-b inhibitors to reduce the effects of long term exposure to direct sunlight. these lamps are available in two package options to give the designer flexibility with device mounting. the hlmp-exxx series replace the hlmp-dxxx and hlmp-uxxx series products. a cross reference is found on page 10 of this data sheet.
2 2 part numbering scheme hlmp-e(1)(2)(3)- (4)(5)(6)(7)(8) where (1) = color l =592 nm amber j =605 nm orange h =615 nm reddish- orange g =626 nm red where (2)(3) = viewing angle and lead standoffs 08 =6 degree without lead standoffs 10 =6 degree with lead standoffs 15 =15 degree without lead standoffs 17 =15 degree with lead standoffs 24 =23 degree without lead standoffs 26 =23 degree with lead standoffs 30 =30 degree without lead standoffs 32 =30 degree with lead standoffs where (4) = minimum intensity bin (refer to table on page 9) where (5) = maximum intensity bin (refer to table on page 9) where (6) = color bin selection k =amber color bins 2 and 4 only (refer to table on page 9) 4 =amber color bin 4 only (refer to table on page 9) where (7)(8) = mechanical or packaging option 00 =bulk packaging, minimum increment 500/bag dd=ammo pack, minimum increment 2000/box. available for products shown in bold in selection guide. refer to the device selection guides for available combinations. device selection guide typical viewing color and luminous angle dominant lamps without standoffs lamps with standoffs intensity iv (mcd) [1,2] 2 q 1 / 2 wavelength on leads on leads @ 20 ma (deg.) [4] (nm), typ. [3] (outline drawing a) (outline drawing b) min. max. hlmp-el08-sv000 hlmp-el10-sv000 1650 6300 hlmp-el08-tw000 hlmp-el10-tw000 2170 8300 hlmp-el08-uw000 2750 8300 hlmp-el08-uwk00* 2750 8300 hlmp-el08-ux000 hlmp-el10-ux000 2750 10700 hlmp-el08-uxk00* 2750 10700 6 [5] amber 590 hlmp-el08-vw000 3600 8300 hlmp-el08-vwk00* 3600 8300 hlmp-el08-vx000 3600 10700 hlmp-el08-vx400** 3600 10700 hlmp-el08-vxk00* 3600 10700 hlmp-el08-vy000 hlmp-el10-vy000 3600 13800 hlmp-el08-vyk00* 3600 13800 notes: 1. the luminous intensity is measured on the mechanical axis of the lamp package. 2. the optical axis is closely aligned with the package mechanical axis. 3. the dominant wavelength, l d , is derived from the cie chromaticity diagram and represents the color of the lamp. 4. q 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. the intensity of narrow viewing angle lamps is measured at the intensity peak. part numbers in bold are recommended for new designs. *hlmp-xlxx-xxk00 are selected to amber color bins 2 and 4 only. **hlmp-xlxx-xx400 are selected to amber color bin 4 only. 0 = no color bin limitation
3 device selection guide (continued) typical viewing color and luminous angle dominant lamps without standoffs lamps with standoffs intensity iv (mcd) [1,2] 2 q 1 / 2 wavelength on leads on leads @ 20 ma (deg.) [4] (nm), typ. [3] (outline drawing a) (outline drawing b) min. max. hlmp-ej08-tw000 hlmp-ej10-tw000 2170 8300 hlmp-ej08-ux000 hlmp-ej10-ux000 2750 10700 orange 605 hlmp-ej08-vy000 hlmp-ej10-vy000 3600 13800 hlmp-ej08-wz000 hlmp-ej10-wz000 4700 18400 hlmp-eh08-sv000 hlmp-eh10-sv000 1650 6300 hlmp-eh08-tw000 hlmp-eh10-tw000 2170 8300 red-orange 615 hlmp-eh08-ux000 hlmp-eh10-ux000 2750 10700 6 [5] hlmp-eh08-vy000 hlmp-eh10-vy000 3600 13800 hlmp-eg08-sv000 hlmp-eg10-sv000 1650 6300 hlmp-eg08-tw000 hlmp-eg10-tw000 2170 8300 hlmp-eg08-uw000 2750 8300 red 626 hlmp-eg08-ux000 hlmp-eg10-ux000 2750 10700 hlmp-eg08-vw000 3600 8300 hlmp-eg08-vx000 3600 10700 hlmp-eg08-vy000 hlmp-eg10-vy000 3600 13800 hlmp-el15-ps000 hlmp-el17-ps000 765 2900 hlmp-el15-qr000 1000 2200 hlmp-el15-qrk00* 1000 2200 hlmp-el15-qs000 1000 2900 hlmp-el15-qs400** 1000 2900 amber 590 hlmp-el15-qsk00* 1000 2900 hlmp-el15-qt000 hlmp-el17-qt000 1000 3700 15 hlmp-el15-qtk00* 1000 3700 hlmp-el15-ru000 hlmp-el17-ru000 1300 4800 hlmp-el15-sv000 hlmp-el17-sv000 1650 6300 hlmp-ej15-ps000 hlmp-ej17-ps000 765 2900 hlmp-ej15-qt000 hlmp-ej17-qt000 1000 3700 orange 605 hlmp-ej15-ru000 hlmp-ej17-ru000 1300 4800 hlmp-ej15-sv000 hlmp-ej17-sv000 1650 6300 notes: 1. the luminous intensity is measured on the mechanical axis of the lamp package. 2. the optical axis is closely aligned with the package mechanical axis. 3. the dominant wavelength, l d , is derived from the cie chromaticity diagram and represents the color of the lamp. 4. q 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. the intensity of narrow viewing angle lamps is measured at the intensity peak. part numbers in bold are recommended for new designs. *hlmp-xlxx-xxk00 are selected to amber color bins 2 and 4 only. **hlmp-xlxx-xx400 are selected to amber color bin 4 only.
4 4 device selection guide (continued) typical viewing color and luminous angle dominant lamps without standoffs lamps with standoffs intensity iv (mcd) [1,2] 2 q 1 / 2 wavelength on leads on leads @ 20 ma (deg.) [4] (nm), typ. [3] (outline drawing a) (outline drawing b) min. max. hlmp-eh15-ps000 hlmp-eh17-ps000 765 2900 hlmp-eh15-qt000 hlmp-eh17-qt000 1000 3700 red-orange 615 hlmp-eh15-ru000 hlmp-eh17-ru000 1300 4800 hlmp-eh15-sv000 hlmp-eh17-sv000 1650 6300 15 hlmp-eg15-ps000 hlmp-eg17-ps000 765 2900 hlmp-eg15-qt000 hlmp-eg17-qt000 1000 3700 red 626 hlmp-eg15-ru000 hlmp-eg17-ru000 1300 4800 hlmp-eg15-sv000 hlmp-eg17-sv000 1650 6300 hlmp-el24-lp000 hlmp-el26-lp000 345 1330 hlmp-el24-mq000 hlmp-el26-mq000 450 1730 hlmp-el24-nq000 590 1730 hlmp-el24-nqk00* 590 1730 hlmp-el24-nr000 hlmp-el26-nr000 590 2200 hlmp-el24-nrk00* 590 2200 amber 590 hlmp-el24-pq000 765 1730 hlmp-el24-pqk00* 765 1730 hlmp-el24-pr000 765 2200 hlmp-el24-pr400** 765 2200 hlmp-el24-prk00* 765 2200 hlmp-el24-ps000 hlmp-el26-ps000 765 2900 23 hlmp-el24-psk00* 765 2900 hlmp-ej24-mq000 hlmp-ej26-mq000 450 1730 hlmp-ej24-nr000 hlmp-ej26-nr000 590 2200 orange 605 hlmp-ej24-ps000 HLMP-EJ26-PS000 765 2900 hlmp-ej24-qt000 hlmp-ej26-qt000 1000 3700 hlmp-eh24-lp000 hlmp-eh26-lp000 345 1330 hlmp-eh24-mq000 hlmp-eh26-mq000 450 1730 red-orange 615 hlmp-eh24-nr000 hlmp-eh26-nr000 590 2200 hlmp-eh24-ps000 hlmp-eh26-ps000 765 2900 hlmp-eg24-lp000 hlmp-eg26-lp000 345 1330 hlmp-eg24-mq000 hlmp-eg26-mq000 450 1730 red 626 hlmp-eg24-nr000 hlmp-eg26-nr000 590 2200 hlmp-eg24-ps000 hlmp-eg26-ps000 765 2900
5 device selection guide (continued) typical viewing color and luminous angle dominant lamps without standoffs lamps with standoffs intensity iv (mcd) [1,2] 2 q 1 / 2 wavelength on leads on leads @ 20 ma (deg.) [4] (nm), typ. [3] (outline drawing a) (outline drawing b) min. max. hlmp-el30-lp000 hlmp-el32-lp000 345 1330 hlmp-el30-mq000 hlmp-el32-mq000 450 1730 hlmp-el30-nq000 590 1730 hlmp-el30-nqk00* 590 1730 hlmp-el30-nr000 hlmp-el32-nr000 590 2200 hlmp-el30-nrk00* 590 2200 amber 590 hlmp-el30-pq000 765 1730 hlmp-el30-pqk00* 765 1730 hlmp-el30-pr000 765 2200 hlmp-el30-pr400** 765 2200 hlmp-el30-prk00* 765 2200 hlmp-el30-ps000 hlmp-el32-ps000 765 2900 hlmp-el30-psk00* 765 2900 hlmp-ej30-mq000 hlmp-ej32-mq000 450 1730 hlmp-ej30-nr000 hlmp-ej32-nr000 590 2200 30 orange 605 hlmp-ej30-ps000 hlmp-ej32-ps000 765 2900 hlmp-ej30-qt000 hlmp-ej32-qt000 1000 3700 hlmp-eh30-kn000 hlmp-eh32-kn000 270 1000 hlmp-eh30-lp000 hlmp-eh32-lp000 345 1330 red-orange 615 hlmp-eh30-mq000 hlmp-eh32-mq000 450 1730 hlmp-eh30-nr000 hlmp-eh32-nr000 590 2200 hlmp-eg30-kn000 hlmp-eg32-kn000 270 1000 hlmp-eg30-ln000 345 1000 hlmp-eg30-lp000 hlmp-eg32-lp000 345 1330 red 626 hlmp-eg30-mn000 450 1000 hlmp-eg30-mp000 450 1330 hlmp-eg30-mq000 hlmp-eg32-mq000 450 1730 hlmp-eg30-nr000 hlmp-eg32-nr000 590 2200 notes: 1. the luminous intensity is measured on the mechanical axis of the lamp package. 2. the optical axis is closely aligned with the package mechanical axis. 3. the dominant wavelength, l d , is derived from the cie chromaticity diagram and represents the color of the lamp. 4. q 1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity. 5. the intensity of narrow viewing angle lamps is measured at the intensity peak. part numbers in bold are recommended for new designs. *hlmp-xlxx-xxk00 are selected to amber color bins 2 and 4 only. **hlmp-xlxx-xx400 are selected to amber color bin 4 only.
6 6 notes: 1. all dimensions are in millimeters (inches). 2. leads are mild steel, solder dipped. 3. tapers shown at top of leads (bottom of lamp package) indicate an epoxy meniscus that may extend about 1 mm (0.040 in.) down the leads. 4. recommended pc board hole diameters: ? lamp package a without stand-offs: flush mounting at base of lamp package = 1.143/1.067 (0.044/0.042). ? lamp package b with stand-offs: mounting at lead stand-offs = 0.965/0.889 (0.038/0.035). 5. for dome heights above lead stand-off seating plane, d, lamp package b, see table. b package dimensions a 1.14 ?0.20 (0.045 ?0.008) 5.80 ?0.20 (0.228 ?0.008) 5.00 ?0.20 (0.197 ?0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 ?0.20 (0.343 ?0.008) 2.54 ?0.38 (0.100 ?0.015) 0.50 ?0.10 (0.020 ?0.004) sq. typ. cathode lead 2.35 (0.093) max. cathode flat 1.14 ?0.20 (0.045 ?0.008) 5.80 ?0.20 (0.228 ?0.008) 5.00 ?0.20 (0.197 ?0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 ?0.20 (0.343 ?0.008) 2.54 ?0.38 (0.100 ?0.015) 0.50 ?0.10 (0.020 ?0.004) sq. typ. cathode lead cathode flat d 1.50 ?0.15 (0.059 ?0.006) part no. d hlmp-xx10 12.37 ?0.25 (0.487 ?0.010) hlmp-xx17 12.42 ?0.25 (0.489 ?0.010) hlmp-xx26 12.52 ?0.25 (0.493 ?0.010) hlmp-xx32 11.96 ?0.25 (0.471 ?0.010)
7 electrical/optical characteristics at t a = 25 c parameter symbol min. typ. max. units test conditions forward voltage i f = 20 ma amber ( l d = 590 nm) 2.02 orange ( l d = 605 nm) v f 1.98 2.4 v red-orange ( l d = 615 nm) 1.94 red ( l d = 626 nm) 1.90 reverse voltage v r 520 vi f = 100 m a peak wavelength: peak of wavelength of amber ( l d = 590 nm) 592 spectral distribution orange ( l d = 605 nm) l peak 609 nm at i f = 20 ma red-orange ( l d = 615 nm) 621 red ( l d = 626 nm) 635 spectral halfwidth dl 1/2 17 nm wavelength width at spectral distribution 1 / 2 power point at i f = 20 ma speed of response t s 20 ns exponential time constant, e -t/ t capacitance c 40 pf v f = 0, f = 1 mhz thermal resistance r q j-pin 240 c/w led junction-to-cathode lead luminous efficacy [1] emitted luminous amber ( l d = 590 nm) 480 power/emitted radiant orange ( l d = 605 nm) h v 370 lm/w power red-orange ( l d = 615 nm) 260 red ( l d = 626 nm) 150 note: 1. the radiant intensity, i e , in watts per steradian, may be found from the equation i e = i v / h v , where i v is the luminous intensity in candelas and h v is the luminous efficacy in lumens/watt. absolute maximum ratings at t a = 25 c dc forward current [1,2,3] ............................................................ 50 ma peak pulsed forward current [2,3] .............................................. 100 ma average forward current [3] ......................................................... 30 ma reverse voltage (i r = 100 m a) ......................................................... 5 v led junction temperature .......................................................... 130 c operating temperature .............................................. -40 c to +100 c storage temperature .................................................. -40 c to +120 c dip/drag soldering temperature ........................... 260 c for 6 seconds through-the-wave preheat temperature ...................................... 145 c through-the-wave solder temperature ................. 245 c for 3 seconds [1.59 mm (0.060 in.) below seating plane] notes: 1. derate linearly as shown in figure 4. 2. for long term performance with minimal light output degradation, drive currents between 10 ma and 30 ma are recommended. for more information on recommended drive conditions, please refer to hp application brief i-024 (5966-3087e). 3. operating at currents below 1 ma is not recommended. please contact your local hewlett-packard representative for further information. s
8 8 figure 2. forward current vs. forward voltage. figure 3. relative luminous intensity vs. forward current. figure 4. maximum forward current vs. ambient temperature. derating based on t jmax = 130 c. figure 1. relative intensity vs. peak wavelength. figure 5. representative spatial radiation pattern for 6 viewing angle lamps. i f ?forward current ?ma 0 0 t a ?ambient temperature ?? 40 80 50 40 30 20 10 20 60 100 r q ja = 585?c/w r q ja = 780?c/w relative intensity ?% 100 0 q ?angular displacement ?degrees 80 60 50 70 20 -20 -15 10 30 40 -10 0 5 10 15 20 25 90 -25 -5 figure 6. representative spatial radiation pattern for 15 viewing angle lamps. relative intensity ?% 100 0 q ?angular displacement ?degrees 80 60 50 70 20 10 30 40 90 -20 -15 -10 0 5 10 15 20 25 -25 -5 wavelength ?nm relative intensity 550 600 650 700 1.0 0.5 0 amber red-orange orange red relative luminous intensity (normalized at 20 ma) 0 0 i f ?dc forward current ?ma 40 3.0 2.0 1.5 1.0 0.5 20 60 2.5 current ?ma 1.0 0 v f ?forward voltage ?v 2.5 100 40 30 1.5 2.0 60 3.0 10 20 50 red amber 70 80 90
9 figure 7. representative spatial radiation pattern for 23 viewing angle lamps. figure 8. representative spatial radiation pattern for 30 viewing angle lamps. relative intensity ?% 100 0 q ?angular displacement ?degrees 80 60 50 70 20 10 30 40 90 -20 -15 -10 0 5 10 15 20 25 -25 -5 relative intensity ?% 100 0 q ?angular displacement ?degrees 80 60 50 70 20 10 30 40 90 -20 -15 -10 0 5 10 15 20 25 -25 -5 bin name min. max. k 310 400 l 400 520 m 520 680 n 680 880 p 880 1150 q 1150 1500 r 1500 1900 s 1900 2500 t 2500 3200 u 3200 4200 v 4200 5500 w 5500 7200 x 7200 9300 y 9300 12000 z 12000 16000 intensity bin limits (mcd at 20 ma) tolerance for each bin limit is 15%. bin name min. max. 1 584.5 587.0 2 587.0 589.5 4 589.5 592.0 6 592.0 594.5 hlmp-xlxx color bin limits (nm at 20 ma) tolerance for each bin limit is 0.5 nm. note: 1. bin categories are established for classification of products. products may not be available in all bin categories.
10 10 part number cross reference hewlett-packard precision optical performance t-1 3 / 4 alingap ii lamps part numbers are changing. the advantages of the new part numbering system include: - specification of maximum intensities - for comparison/substitution purposes, easier recognition of parts which are the same color and viewing angle, but differ only in intensity and/or color bin selection in each case, except for hlmp-dl24 and dl26, the new part number is an exact replacement for the old part number. old part number new part number hlmp-dg08 hlmp-eg08-ux000 hlmp-dg10 hlmp-eg10-ux000 hlmp-dg15 hlmp-eg15-ru000 hlmp-dg17 hlmp-eg17-ru000 hlmp-dg24 hlmp-eg24-ps000 hlmp-dg26 hlmp-eg26-ps000 hlmp-dg30 hlmp-eg30-mq000 hlmp-dg32 hlmp-eg32-mq000 hlmp-dh08 hlmp-eh08-ux000 hlmp-dh10 hlmp-eh10-ux000 hlmp-dh15 hlmp-eh15-ru000 hlmp-dh17 hlmp-eh17-ru000 hlmp-dh24 hlmp-eh24-ps000 hlmp-dh26 hlmp-eh26-ps000 hlmp-dh30 hlmp-eh30-mq000 hlmp-dh32 hlmp-eh32-mq000 hlmp-dj08 hlmp-ej08-wz000 hlmp-dj10 hlmp-ej10-wz000 hlmp-dj15 hlmp-ej15-ru000 hlmp-dj17 hlmp-ej17-ru000 hlmp-dj24 hlmp-ej24-qt000 hlmp-dj26 hlmp-ej26-qt000 hlmp-dj30 hlmp-ej30-ps000 hlmp-dj32 hlmp-ej32-ps000 hlmp-dl08 hlmp-el08-vy000 hlmp-dl10 hlmp-el10-vy000 hlmp-dl15 hlmp-el15-sv000 hlmp-dl17 hlmp-el17-sv000 hlmp-dl24 hlmp-el25-qt000 or hlmp-el24-ps000* hlmp-dl26 hlmp-el27-qt000 or hlmp-el26-ps000* hlmp-dl30 hlmp-el30-ps000 hlmp-dl32 hlmp-el32-ps000 *the new parts are not exact replacements for hlmp-dl2x. hlmp-el2x-qt000 are alingap ii lamps of equivalent intensity. hlmp-el2x-ps000 are alingap lamps of slightly lower intensity.
11 old part number new part number hlmp-ug06 hlmp-eg08-sv000 hlmp-ug07 hlmp-eg10-sv000 hlmp-ug13 hlmp-eg15-ps000 hlmp-ug14 hlmp-eg17-ps000 hlmp-ug22 hlmp-eg24-lp000 hlmp-ug23 hlmp-eg26-lp000 hlmp-ug28 hlmp-eg30-kn000 hlmp-ug29 hlmp-eg32-kn000 hlmp-uh06 hlmp-eh08-sv000 hlmp-uh07 hlmp-eh10-sv000 hlmp-uh13 hlmp-eh15-ps000 hlmp-uh14 hlmp-eh17-ps000 hlmp-uh22 hlmp-eh24-lp000 hlmp-uh23 hlmp-eh26-lp000 hlmp-uh28 hlmp-eh30-kn000 hlmp-uh29 hlmp-eh32-kn000 hlmp-uj06 hlmp-ej08-tw000 hlmp-uj07 hlmp-ej10-tw000 hlmp-uj13 hlmp-ej15-ps000 hlmp-uj14 hlmp-ej17-ps000 hlmp-uj22 hlmp-ej24-mq000 hlmp-uj23 hlmp-ej26-mq000 hlmp-uj28 hlmp-ej30-mq000 hlmp-uj29 hlmp-ej32-mq000 hlmp-ul06 hlmp-el08-sv000 hlmp-ul07 hlmp-el10-sv000 hlmp-ul13 hlmp-el15-ps000 hlmp-ul14 hlmp-el17-ps000 hlmp-ul22 hlmp-el24-mq000 hlmp-ul23 hlmp-el26-mq000 hlmp-ul28 hlmp-el30-lp000 hlmp-ul29 hlmp-el32-lp000
for technical assistance or the location of your nearest hewlett-packard sales office, distributor or representative call: americas/canada: 1-800-235-0312 or 408-654-8675 far east/australasia: call your local hp sales office. japan: (81 3) 3335-8152 europe: call your local hp sales office. www.hp.com/go/led data subject to change. copyright ? 1999 hewlett-packard co. obsoletes 5968-6189e (7/99) 5968-7459e (8/99)

▲Up To Search▲

Price & Availability of HLMP-EJ26-PS000

	To Download HLMP-EJ26-PS000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .